RECORDING & IMPORTING: Once the Yeti mic is selected, you can begin recording. You may also need to select the drop down menu next to the microphone icon (1) and select the Yeti mic. If Audacity is not registering the mic, quit the app and try again. If you are going to be recording audio with audacity, you’ll want to plug in your Yeti mic into the USB port before opening audacity. ![]() Downloads are available for Mac, Windows, and Linux. SETUP: To get started, you’ll need to download the Audacity app. If you are interested in features or functions not mentioned in this brief introduction, please see the Audacity Manual for more tutorials or assistance. Editing Audio in AudacityĪudacity is an accessible multi-track audio recording and editing software with a number of important features and effects, particularly for preparing podcasts. When the microphone is not muted, the button will glow solid red. When the microphone is muted, the button will flash red. ![]() It should be about one foot away from the person speaking, and oriented so that the person is speaking toward the side rather than the top of the microphone as shown in the image to the left.Īfter your microphone is plugged into your USB port and you’ve selected the correct microphone pattern, open Audacity and change the audio source from the “Built-In Microphone” to the “Yeti Stereo Microphone.” Be sure that the microphone isn’t muted. The “omnidirectional” mode is a good choice for ambient room sound, but similarly is not ideal for recording voice tracks.īe sure that your microphone is positioned correctly. The “stereo” mode should never be used to record voice audio, but is the best choice for recording music. The “Cardioid” mode is best for almost all applications where only one person is speaking, while the “bidirectional” mode is best for a situation where you wish to record two speakers in conversation with one another. Note that if you open Audacity before plugging in the microphone, you will not be able to select the Yeti Mic as your audio source.īe sure to choose the right microphone pattern for the type of audio you will be recording. You can import these into the editing software you prefer.īefore you begin recording, plug in the Yeti Mic’s USB cable to a USB port on your computer. ![]() Drag the files to your computer to save a copy of them.Each of these folders will have ‘FOLDER01-FOLDER10’ in them.Your files will be in the folder that corresponds to the recording setting you used. The SD card will have three folders on it: 4CH, MTR, STEREO.When you’re done recording, press in on the SD card to eject it, and put the card into a computer.You can record as many clips as are necessary. The indicator ring around the button should be red, and the time indicator on the screen should be counting up. Press the ‘REC/⚫’ button again to start recording.Adjust the recording level using buttons on the right side to set the level to the middle of the range. Speak as you will during your recording and watch the sound level.The recording indicator around the button will start flashing. Press the record button (REC / ⚫) once to check the status.If it says “NO DATA,” try removing the card and putting it back in. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |